Commercial 1.6mL triangle gummy mold for repeatable production. The price shown is per mold. When ready stock is available, individual molds can be purchased and typically ship in 1–2 business days. When ready stock is sold out, this design remains available as a made-to-order purchase with a 10-mold minimum and an estimated 1–2-week production lead time before shipping. Orders above available stock are split: available molds ship first, and the remaining quantity is made to order. Shipping is calculated at checkout.
Produce consistent faceted triangle- or low-pyramid-shaped gummies, supplements, candies, and confectionery pieces with this platinum-cured food-grade silicone mold. Each tray contains 220 cavities in a 20 × 11 layout, with an approximate measured water capacity of 1.6mL per cavity and a nominal combined cavity capacity of approximately 352mL.
Product Specifications
- Shape: Faceted triangle / low pyramid
- Cavity volume: Approximately 1.6mL per cavity
- Cavity count: 220 cavities per mold
- Cavity layout: 20 × 11
- Approximate cavity dimensions: 22 × 22 × 7mm (0.87 × 0.87 × 0.28 inches)
- Total mold capacity: Approximately 352mL
- Mold dimensions: 380 × 287 × 11.7mm (14.96 × 11.30 × 0.46 inches)
- Mold format: Half-sheet compatible
- Material: Platinum-cured food-grade silicone
- Maximum temperature: 400°F (204°C)
- Cleaning: Dishwasher safe
- Oven safe: Yes, up to 400°F
- Freezer safe: Yes
- BPA free: Yes
- Food-contact testing: Silicone material passes FDA extractive testing for food-contact use
Commercial Production Use
One completely filled mold can produce up to 220 pieces per cycle. Ten molds provide 2,200 cavities per production cycle. Actual yield may be lower because of setup, filling loss, rejected pieces, and normal production variation.
Finished-piece weight depends on formulation density, solids content, moisture, fill level, and processing conditions. A 1.6mL cavity does not guarantee a specific gram weight, dosage, or serving size. Produce and weigh a test batch before establishing production specifications or label claims.
Filling and Equipment Compatibility
This mold may be used for hand filling, pour-and-scrape production, and compatible commercial depositing systems. Depositor compatibility depends on tray dimensions, nozzle spacing, shot volume, cavity alignment, formulation viscosity, operating temperature, and machine settings. Confirm compatibility before ordering.
Care and Handling
Wash and inspect the mold before first use and between production cycles. The platinum silicone mold is reusable, dishwasher safe, freezer safe, and oven safe up to 400°F. Use non-abrasive cleaning methods and follow the sanitation, handling, and food-safety procedures required by your facility and formulation.
Frequently Asked Questions
How many gummies does one mold produce?
Each mold contains 220 individual triangle cavities and can produce up to 220 pieces per cycle.
What is the total capacity of one mold?
At approximately 1.6mL per cavity, one completely filled mold has a nominal combined cavity capacity of approximately 352mL.
What happens when the mold is out of stock?
The design remains available as a bulk made-to-order product with a 10-mold minimum. Ready stock can be purchased individually whenever inventory is available.
Can I order a different triangle size or cavity layout?
Yes. Request a custom gummy mold for a different volume, cavity count, logo, texture, or production layout. Browse additional shapes in the commercial gummy mold collection or estimate production needs with the gummy mold production calculator.